Generator radiator use and maintenance instructions
Remote cooling radiator
Guangzhou nanhong radiator

How to use a generator

1:Working press: according to the design pressure of the radiator tank.

2. After water supplying,if the radiator is partially cool,open the vent valve to discharge the air until there is water overflow, close it.If the predetermined effect is not achieved, repeat the operation for several times. (note that the vent valve shall not be opened at will at ordinary times to prevent water leakage.)

3. The radiator shall use clean soft water. It is strictly prohibited to add corrosive liquid and carry sediment and other sundries.

4. According to the different regions of actual use, antifreeze in different proportions should be added to the coolant. The coolant can be purchased only after it has passed the authorization and certification. Use according to the instructions.

5. The exhaust valve of the water filler cap of the expansion tank shall be opened when the pressure is 90 ± 5kpa, and the inlet valve shall be opened when the vacuum degree is 0.98~11.2kpa. For the water tank with expansion chamber, when adding water, the water supply pipe of the lower chamber continuously enters the water tank through the water outlet of the water tank. This structure takes a long time to add water. The customer can start the machine only after it is filled with water.

6. For the water tank with expansion chamber, do not add too much water, and leave appropriate space at the upper part of the expansion chamber. When installing the expansion tank, the upper liquid level must be at the highest position of the whole system.

Leave a comment

Your email address will not be published. Required fields are marked *